01 / BEFORE DISPATCH
The machine is still on our floor
This URL is for the check that happens in the Spack workshop before packing. It is not a machine selector.
Quality
How we check a machine before it ships.
Before packing, the machine is run against the factory-acceptance conditions agreed for that project. This page is the check-before-dispatch story — not a second warranty, and not a published SLA.
There is no canned inspection protocol on this page. What is tested, with which product and film, and who may attend are written when the configuration is frozen.
FATRun against the conditions agreed for that order
WhereSpack workshop, before packing
MaterialsNamed in the quotation for that build
After dispatchWarranty and support on Services
What this page covers
This page is the check before the machine ships.
Footer Quality is this Keep URL. After-sales — warranty, spare parts, remote diagnosis, on-site visits — live on Services.
Spack Machine checks a sold machine before dispatch: a factory run against the conditions agreed for that order.
Application review, configuration, assembly, setup and project-specific testing happen on the Spack workshop floor in Shantou, Guangdong, China. The written scope for that project is what gets checked — not a generic brochure list.
Project boundary: final responsibilities belong in the signed order, not in web copy. Ask for the factory-acceptance lines in the proposal.
02 / AGREED CONDITIONS
Factory acceptance is written per order
What is tested, with which product and film, and who may attend are written when the configuration is frozen.
03 / NOT AFTER-SALES
Warranty is not restated here
Spare parts, remote support and on-site visits are stated on Services. This page does not publish a second warranty.
- Not a second warrantyThe commercial split after shipment is on Services. It is not copied here.
- Not a 12-hour clockWe do not promise a reply within a fixed number of hours.
- Not CE or FDA certificationThis page does not publish CE or FDA as Spack machine certification.
- Not a lifespan promiseNo 10-year service life, uptime, or ROI figure is published here.
Factory acceptance
Factory acceptance is a run against agreed conditions.
Same sentence as live Services and the homepage project path. The recipe is not invented on the website.
The machine is run before packing.
The machine is run against the factory-acceptance conditions agreed for that project. What is tested, with which product and film, and who may attend are written when the configuration is frozen. There is no canned protocol on this page.
Ask for those details in the proposal rather than assuming a standard set. Sample testing before an order can be available on request; that is a fit check, not this dispatch run.
Path, not a SOP. Manufacture, factory acceptance, then packing and documents — steps 04–06 on the homepage. This URL does not add extra test days, witness rights, or a downloadable checklist.
Visible checks
Workshop stills of checking work — not a published protocol.
These photographs are already on this Keep URL. Captions describe what is visible. They are not leftover test titles, and they are not accuracy, leak, or speed figures.
Photographs document visible work only. They do not prove factory scale, certification, a named customer plant, or that every order uses the same observations.
Materials and workmanship
Hardware is selected per project. The quotation names it.
Frames, contact parts, and control hardware are specified in the written scope for that build. This page does not publish a site-wide bill of materials.
Control, drive, vacuum and pneumatic hardware is chosen around each machine configuration. The final bill of materials in your written scope governs.
The homepage components strip shows typical hardware already used on Spack machines: Siemens, Becker, Festo and Schneider. Those photographs are typical, not a promise that every quotation uses the same brands.
Stainless-steel frames and contact parts, when they are part of a family, are named on that machine page and confirmed again in the quotation. This URL does not publish a stainless grade as a site-wide guarantee.
Typical · homepageSiemens
Operator interface, machine controller, motor speed control — as shown on the homepage.
Typical · homepageBecker
Vacuum generation. Selected when the configuration needs it.
Typical · homepageFesto
Pneumatic control. Named in the quotation for that build.
Typical · homepageSchneider
Electrical switching. Typical hardware, not a universal BOM.
Workmanship on the floor. Assembly and setup happen in the Spack workshop. Speed on a sold machine is stated with product and pack conditions — a dry-cycle maximum is not a production rate.
Before dispatch
Questions about checks before the machine ships.
Query-shaped questions. The first sentence is the answer.
How does Spack Machine check a packaging machine before it ships?
The machine is run against the factory-acceptance conditions agreed for that project.
What is tested, with which product and film, and who may attend are written when the configuration is frozen. See factory acceptance.
What is a factory acceptance test on a Spack packaging machine?
Factory acceptance is a factory run against the conditions agreed for that order, before packing.
The same sentence is on Services and on the homepage project path. There is no canned protocol on this page.
Does Spack Machine publish a standard inspection checklist?
No. There is no canned protocol on this page.
Ask for the observations in the proposal rather than assuming a standard checklist. Photographs on this URL show checking work; they are not a specification.
Where is the warranty on a Spack packaging machine stated?
Warranty, spare parts and remote support are stated on the Services page.
This URL does not publish a second warranty. Open Warranty & spare parts.
Does this page certify Spack machines to CE or FDA?
No. This page does not publish CE or FDA as Spack machine certification.
Do not treat leftover certificate scans or the site popup as a machine-level claim on this URL.
Which materials and component brands are on a Spack packaging machine?
Control, drive, vacuum and pneumatic hardware is chosen around each machine configuration; the final bill of materials in the written scope governs.
Typical hardware shown on the homepage components strip: Siemens, Becker, Festo and Schneider. That strip is not a quotation BOM.
No SLA on this page. We do not promise a reply within a fixed number of hours.
Where to go next
After the check, support lives on Services.
This URL is not a machine selector and not a warranty page. These Keep pages are the live next steps.
Other families. Vertical form-fill-seal: VFFS Keep URL. Tea and coffee: tea hub.
Tell us the product, the film, and what you want to see run.
We will use that to say what can be written into the factory-acceptance conditions — without a canned checklist and without a fixed-hour reply clock.
