• English
  • Español
  • Русский
  • Français
  • Português
Get a Quote

Coffee packaging lines

Coffee Packaging Machine

Pick the machine from the coffee pack you sell. Drip bag coffee runs on the SPM-T300. Whole beans and ground coffee in flat-bottom, side-gusset or zipper pouches run on a rotary premade pouch machine with a weigher or auger. Roll-film coffee bags run on a high-speed VFFS, and instant coffee sticks and sachets on the VFFS-320 / 420. Send your coffee and your bag: we return a test video within 3 working days of receiving the samples.

Request a quote Compare the lines
Workshop packaging line with a feed elevator, multihead weigher, platform and rotary pouch machine
Elevator, multihead weigher and rotary pouch machine on our assembly floor in Shantou.
Four lines
Drip bag · rotary premade pouch
High-speed VFFS · stick and sachet VFFS
Speed
Drip bags: 30–70/min
Pouches: 10–60/min · VFFS: up to 100/min
Freshness
Nitrogen flush option · valve pouches · barrier films tested with your coffee
Delivery
14–40 days from deposit · CE marked (2006/42/EC)

01

Quick answer

Which coffee packaging machine do I need?

Start from the coffee and the bag on the shelf. Premade pouches point to the rotary machine, roll-film bags to VFFS, and drip bags to the SPM-T300. Whole beans are weighed; ground and instant coffee are dosed by auger.

Your coffee and bagRecommended lineWhy
Drip bag coffee (hanging-ear filter bag in an envelope)SPM-T300 drip coffee bag machineMakes the filter bag and the outer envelope on one machine, with a nitrogen option for the envelope.
Whole beans in flat-bottom, quad-seal or side-gusset bags with a valveRotary premade pouch + multihead weigherRuns the printed valve bags you already buy. The weigher handles beans without crushing them.
Ground coffee in stand-up or zipper pouchesRotary premade pouch + auger fillerThe auger doses fine, cohesive ground coffee by volume; a zipper opening device opens the zipper before filling.
Beans or ground coffee in roll-film pillow or gusset bags, 250 g to bulkHigh-speed VFFS + weigher or augerThe bag is formed from roll film on the machine, the lower-cost route at volume. Valve and gas flush are options.
Instant coffee, 3-in-1 mixes or ground coffee in stick packs or sachetsVFFS-320 / 420 + auger fillerForms narrow single-serve sticks or 3- and 4-side-seal sachets from 40 to 200 mm wide.

Coffee capsules and pods need a cup-filling and lidding machine, which is not one of the lines on this page. Tea bags have their own guide: tea and coffee packaging hub.

02

Line configurations

Four coffee packaging lines

Each line is quoted as separate items: feeding, filler, packing machine, options and discharge. Models and figures below are the ones published on our machine pages.

SPM-T300 drip coffee bag packing machine

SPM-T300

Drip coffee bag machine

Doses ground coffee, forms and ultrasonically seals the hanging-ear filter bag, then heat-seals it into a three-side-seal outer envelope on the same machine.

Packs
Hanging-ear drip bag + outer envelope
Bag size
Inner bag 90 × 70–74 mm · envelope 100 × 120 mm
Speed
30–70 bags/min; your rate depends on the coffee, dose and whether the envelope runs
Dosing
Auger (10–100 mL screws) or vibratory measuring cup
Nitrogen
Option: flushed into the outer envelope before the final seal
Utilities
AC 220 V, 50/60 Hz, 5.65 kW · air 0.5 MPa · about 440 kg
Lead time and CE
28 days standard · CE: UDEM Cert. M.2024.206.C100050
Drip coffee bag machineDrip bag filter
Whole coffee beans, an example product for a rotary premade pouch line

SPM-200R / 250R / 320R

Rotary premade pouch machine

An 8-station rotary machine picks up each premade coffee pouch, opens it, receives the dose, then seals and discharges it. Beans are weighed; ground coffee is dosed by auger.

Pouches
Flat-bottom, quad-seal, side-gusset, stand-up zipper, flat 3-side
Pouch width
SPM-200R: 80–200 mm
SPM-250R: 120–250 mm
SPM-320R: 180–320 mm
Fill weight
10 g to 5 kg across the three models
Speed
10–60 bags/min (SPM-320R: 10–50)
Accuracy
±1% with the filler matched to your coffee, shown in your sample test
Filler
Multihead weigher for beans · auger filler for ground coffee
Options and CE
Gas-flush station, zipper opening, coding · CE: UDEM Cert. M.2024.206.C100050
Rotary premade pouch machineFlat-bottom pouches
Printed side-gusset coffee pouch

VFFS-320S / 420S / 620S

High-speed VFFS for roll-film coffee bags

Forms pillow or gusset bags from roll film, receives the dose from a multihead weigher or auger, then seals and cuts each bag. The lower film cost suits larger volumes and foodservice packs.

Bags
Pillow, gusset, block-style bags from roll film
Bag size
80 × 45 mm to 500 × 300 mm across the family
Speed
Up to 100 bags/min as a screening figure; confirmed in the proposal
Filler
Multihead weigher for beans · auger filler for ground coffee
Bag options
Degassing valve, gas flush, hole punch, tear notch, each confirmed with your bag drawing
CE
VFFS-320S and VFFS-420S: UDEM Cert. M.2024.206.C100050
High-speed VFFS machineMultihead weigher
Printed instant coffee stick pack

VFFS-320 / 420

Stick pack and sachet VFFS for instant coffee

Forms single-serve stick packs or 3- and 4-side-seal sachets from roll film and doses instant coffee, 3-in-1 mixes or ground coffee with an auger.

Packs
Stick packs, 3-side and 4-side sachets, small pillow bags
Bag size
VFFS-320: 40–150 mm wide
VFFS-420: 80–200 mm wide
Speed
10–60 bags/min
Filler
Auger filler for instant coffee and coffee mixes
Finishes
Straight, serrated or shaped cut and tear notch, set on the drawing
CE
VFFS-320 and VFFS-420: UDEM Cert. M.2024.206.C100050
Stick pack machineVFFS machine

03

Running machines

Coffee lines on video

Recorded on Spack Machine lines. Your own sample test video follows the same format.

Drip coffee bag and outer envelopeHanging-ear inner bag and outer envelope made on one machine.
Rotary premade pouch cyclePouch pickup, opening, filling, sealing and discharge.
Multihead weigher on a pouch lineThe weighing route used for whole beans.
Related filter-bag exampleA steeped coffee bag needs its own tooling review.

04

Bag formats

Coffee bag formats we pack

Send a photo or a sample of your bag; the format decides the line. For materials and barrier layers, see the coffee packaging selection guide.

Hanging-ear drip coffee filter bag
Drip bag with envelopeSPM-T300
Printed quad-seal flat-bottom coffee bag
Flat-bottom and quad-seal bagPremade · rotary
Printed side-gusset coffee pouch with zipper
Side-gusset bagPremade (rotary) or roll film (VFFS)
Printed stand-up pouch with zipper
Stand-up zipper pouchPremade · rotary with zipper opening
Printed single-serve coffee stick pack
Stick packRoll film · VFFS-320 / 420
Printed three-side-seal coffee sachet
3-side-seal sachetRoll film · VFFS-320 / 420

05

Freshness and output

What we check on a coffee line

These are the points we check with your coffee and bags before stating a speed and configuration in the quotation.

Degassing valve

Freshly roasted beans release CO₂. Premade bags usually come with the one-way valve fitted; on roll-film bags the valve is an option set on the drawing. Read more on coffee valves.

Nitrogen flushing

Nitrogen pushes out oxygen before the seal to slow staling. Tell us your residual-oxygen target; it changes the flush setup and the speed. See our nitrogen flushing guide.

Grind and dust

Fine grinds and instant powders need an auger matched to the dose and dust control at the bag mouth, because coffee in the seal area causes leaks.

Oily dark roasts

Surface oil on dark-roast beans can slow product flow on the weigher. We check hopper surfaces and discharge with your beans.

Film and pouch barrier

Seal temperature and time follow the laminate, often foil or metallized layers for coffee. Send the material spec or a sample. See coffee pouch seal failures.

Dose, bag volume and output

A 1 kg flat-bottom bag runs slower than a 250 g pouch, and nitrogen adds time per cycle. We state your rate after the sample test.

06

Common questions

Coffee packaging machine FAQs

Which machine is best for packing whole coffee beans?

For retail bags of whole beans in flat-bottom, quad-seal, side-gusset or stand-up zipper pouches, use a rotary premade pouch machine (SPM-200R, 250R or 320R) with a multihead weigher. For pillow or gusset bags made from roll film, use a high-speed VFFS machine with a multihead weigher.

Which machine is best for ground coffee?

Ground coffee is dosed with an auger filler. Put the auger on a rotary premade pouch machine for stand-up, flat-bottom or zipper pouches, or on a VFFS machine for pillow bags, sachets and stick packs. Fines and dust are part of the sample test because they can get into the seal.

Which machine makes drip bag coffee?

The SPM-T300 drip coffee bag packing machine doses ground coffee, forms and ultrasonically seals the hanging-ear filter bag, then seals it into an outer envelope. It runs 30–70 bags/min with a 90 × 70–74 mm inner bag and a 100 × 120 mm envelope.

Can the machine flush the coffee bag with nitrogen?

Yes, as an option. On the SPM-T300 nitrogen is flushed into the outer envelope before the final seal. The rotary premade pouch machine has a configurable gas-flush station, and gas flush is an option on the VFFS lines. Nitrogen is quoted as a separate item and needs a nitrogen supply on site; tell us your residual-oxygen target.

How is the one-way degassing valve added?

Premade coffee pouches usually arrive with the valve already fitted by the pouch supplier, so the rotary machine fills and seals them as they are. On roll-film VFFS bags a degassing valve is a named optional feature; we confirm the valve type and position with your bag drawing before quoting.

How many coffee bags per minute can a machine pack?

SPM-T300 drip bags: 30–70 bags/min. Rotary premade pouches: 10–60 bags/min (SPM-320R: 10–50). VFFS-320 / 420 sachets and stick packs: 10–60 bags/min. High-speed VFFS: up to 100 bags/min as a screening figure. Your rate depends on the dose, bag size and options such as nitrogen, so we state it after the sample test.

How much does a coffee packaging machine cost?

The price depends on the line, the model, the filler (multihead weigher or auger), the elevator and options such as nitrogen, coding or a zipper opening device. Every quotation is itemized so you can compare each part. Send your coffee, bag size and target output for a quote.

Can I test my coffee and bags before ordering?

Yes. Sample testing is free. Send your coffee and your bags, pouches or film; we send a test video within 3 working days of receiving the samples.

Are the coffee packaging machines CE marked?

Yes. SPM-T300, VFFS-320, VFFS-420, VFFS-320S, VFFS-420S and the SPM-200R, 250R and 320R rotary machines are CE-marked under Machinery Directive 2006/42/EC (EN ISO 12100, EN 60204-1, EN 415-1). The technical file was reviewed by UDEM, certificate M.2024.206.C100050, valid to 2029-04-25.

What is the lead time and warranty?

Lead time is 14–40 days from deposit, and 28 days for the standard SPM-T300 drip bag machine. Warranty is 12 months from machine receipt, with remote support first and on-site visits on agreed terms.

Choosing a supplier? See how to choose a coffee packaging machine supplier and the coffee bag types guide.

07

Next step

Get a coffee line quotation

Tell us your coffee, bag and output. An engineer replies with the line, models and an itemized price.

Fields marked * are required. Everything else helps us answer faster.

1Your product

Bag or pack type (optional)

2Where we reply

Company and budget (optional)





    Add it if you prefer WhatsApp replies





    Write how many grams (or ml) and what product — one line is enough.



    Required output, pack style, timeline, utilities, or any questions.



    One PDF, JPG, PNG or WEBP file, up to 5 MB. Additional files can follow by reply or WhatsApp.

    • First reply within 12 hours
    • Used only to reply to this inquiry. Never sold.

    Prefer chat? WhatsApp +86-13226819993 or email sales@spackmachine.com

    Back to top
    Got a packing idea? Say hi — no need to have everything ready.